195′ PRODUCTION BARGE

195′ PRODUCTION BARG

195′ x 35′ x 12′
Bulkheads 5/16″
10-Deck longitudinal angles 5” x 3” x 5/16”.
10-Bottom longitudinal angles  6” x 3.5” x5/16”.
4-Side longitudinal angles  5” x 3.5” x 5/16”
10-Aft bulkhead vertical angles  5” x3.5” x 5/16”
8-Bulkhead gussets 16” x 5/16” x 16” (forward and aft)
10-Bulkhead gussets upper  12” x 3/8” x 1’ (forward and aft)
10-Bulkhead gussets lower  12” x 3/8” x 1’ (forward and aft)
7-Truss frames were construction out of the following:
NOTE: Truss frames are set 5’ aft the forward bulkhead and set 5’ apart thereafter.
Overhead transverse deck girder 8” @ 11.5 lbs. channel
Lower transverse deck girder  12” @ 20.7 lbs. channel
Outboard girders  10” 15.3lb channel
Inboard girders  5” x 3” x 5/16”
3-Vertical stiffeners  5” x 5” x 5/16” angle
4-Diagonal stiffeners 3” x 3” x 5/16” angle
1-Longitudinal diagonal angle 6”x 5/16” x 6” angles